6 Sensor (2 Front / 4 Rear) No Display Parking Sensor Kit
A new breakthrough design! Unit senses any objects behind and to the side of the rear bumper (metal or plastic) within 7 feet through 6 small 22mm Anti-Collision Ultrasonic sensors that are mounted into the Front & Rear bumpers by drilling 2 22mm holes (drill bit included) in the front and 4 22mm holes in the rear bumper giving you a wider, more accurate field of detection. Audible Warning.
Black Ultrasonic sensors.
Kit features 6 sensors for full front & back coverage.
Unique rain-proof design works even when it is raining.
Power is supplied by splicing into backup lights, accessory and ground.
2 Front Sensors are only active while applying the brakes. When in Reverse, Front sensors are switched off and 4 Rear sensors are active.
6 - 22mm in-bumper recessed ultrasound sensors for obstacle detection
Distance is indicated between the vehicle and obstacle by three different interval sounds.
Audible warning sound of "BiBi", faster as you get closer to obstacle.
All components plug into each other.
Built to last - withstands bad weather and road shock.
Operating Voltage: DC 12v
Max. Power Consumption: 3.6W
Red Wire to +12V from Reverse Light (for Rear Sensors)
Yellow Wire to +12V from Brake Light (for Front Sensors)
Black Wire to Ground
Car parking control unit (mount in trunk/rear of vehicle).
Piezo Tweeter Buzzer.
6 Black 22mm In-Bumper obstacle sensors with 8' rear cables and 14' front cables.
6 plastic spacers for angling sensors up (if necessary)
22mm Drill Bit for drilling holes into bumper to mount the 6 sensors.
NOTE: These 6 sensor kits are not designed for long vehicles or trucks as the wires are not long enough and you cannot cut or splice the sensor wires. Only 4 Sensor Kits are available for longer vehicles or trucks.
Click Here to view a 24 minute Sample Installation Video (requires IExplorer)