  Decora Wall Plate Hidden Indoor Camera
 This Indoor Camera comes complete with mounting strap and circuit board, including a balun for clear video over unshielded twisted pair (UTP) cable. The camera also includes 15 VDC input power terminals for a separate power cable in situations where the cable run exceeds the 100 meter limit. Connection is made via punch down of UTP cabling directly to a 110 punch-down strip on the camera or by way of a Cat 5e Jack on the end of a cable run using a CAT 5e UTP patch cable.
The camera’s viewing angle is adjusted via a flexible internal mounting strap. The clear or smoked-translucent inserts that snap onto the mounting strap to hide the camera fit into a standard Decora wallplate (available separately), allowing the installation to blend with other electrical and low-voltage devices on a wall.
Features:
- Mounts on a single-width standard plastic bracket (not supplied)
- High resolution, full-color camera with 420 lines
- 3.6 mm lens, the optimum focal length for the widest variety of indoor applications
- Low light performance down to 0.5 lux
- Integral Decora mounting strap for quick connection in a deep single gang box or mud ring
- Requires Decora trim plate (not included)
- Includes choice of clear window with black felt mask or tinted Decora window to hide interior camera and electronics
- Decora strap and window design supports manual pan and tilt capability; +/- 30 degrees pan; +/- 30 degrees tilt
- Single UTP (Cat-5, -5e or -6) cable termination for both video signal and power connection
- Use either 110 D4 or 8P8C to terminate UTP cable
- T568A wiring termination scheme
- Powering scheme with SMC-mounted Camera board ensures camera power over 24 gauge Cat 5e to 100 meters (328 feet)
- Additional 2 conductor screw terminals (Phoenix connector) for separate input power termination when required
- Green power LED on termination board indicates presence of power
|
