12 Volt Direct Battery Hookup Appliance Power StripTurn your battery into a dynamo of power with our patented power strip. Heavy-duty system and patented power plugs allow our products to draw up to 50 amps of cooking or heating power directly from your batteries without using an inverter. Inverters are inefficient (That's why they are hot) and subject to failure. Switch to the PNP Power Strip and use your battery's full capacity to cook or heat efficiently. Powerstrip is required for use with all PNP PowerHunt products. Specification Installation: (Make sure the cable is connected to proper terminals ) 1. Unscrew the base cover of the Power Strip. 2. Connect the Positive cable (Red color) to the (+) terminal; connect the Negative cable (Red/Black color) to the (-) terminal. 3. Reinstall the base cover onto the Power Strip. 4. Connect the other end of Positive cable to the (+) terminal of the battery; connect the other end of Negative cable to the (-) terminal of the battery. 5. Tighten all screws. Loose screws will generate heat and may cause fire or damage to the battery terminal. ![]() ![]() Special Order Item - No Returns - Exchange for defective only | ||
|
|