30 Amp Fully Regulated Low Ripple Switching AC to DC Power Supply
Heavy-Duty 30-Amp Switching DC Power Supply is designed to use AC power-to-power equipment that requires 12V DC automotive power. The power supply converts standard 120V AC household power to 13.8V DC power and can supply up to 30 amps of continuous power.
Note: Your vehicle's electrical system provides 13.8 Volts when the engine is running.
If you are an electronic hobbyist or technician, you will appreciate the many uses for the power supply at your workbench or in your house. For example, use your CB mobile transceiver as a bass station, check the operation of auto sound systems before you install them in your vehicle, or even power marine equipment such as pumps.
Power Supply's Features Include:
Regulated Output Voltage-Makes it safe to use with mobile CBs, Ham radios, CD players, tape players or anything you would power with a vehicle's DC electrical
Cooling and Fan Control a temperature controlled fan has been provided to improve cooling at high loads. It will come on only when the temperature of the power transformer is above 50 ºC due to higher loads. In case the fan fails or the air flow is blocked, a second temperature sensor mounted on the power transformer will activate over
temperature shut down at 100 ºC. The output voltage will be automatically resumed once the unit cools down.
Electronic Overload Protection-automatically shuts off standard 120V AC input power to the power supply when its output is overloaded.
Overheat Protection Circuit-automatically shuts off if it overheats.
Combo Output Connectors-act as both binding posts and banana plug terminals.
Input Voltage: 110 to 120V AC
Input Frequency: 60 Hz
Output Voltage: 13.8V DC ±0.5 Volts
Output Current: DC Continuous (Maximum)
Line Regulation: Less Than ±5%
Load Regulation: Less Than ±5%
Overload Protection: FUSE 6A/250V
Output Ripple: 150 mV RMS
Design: Switching Type
Operating Temperature: 32 to 86 ºF (0 to 30 ºC)
Storage Temperature: -13 to 158 ºF (-25 to 70 ºC)
Input Cable: SVT18 AWG / 3C 85 ºC 6 Feet
Output Terminal: Binding Post 10 Amp/125 Volts
Dimensions: 11.4 x 10.2 x 4.7 inches
Power Switch: Illuminated, 10A /250 VAC
Click Here for Manual