Wired Display - 4 In Bumper Flush Mount Ultrasonic Reverse Parking Sensors
This parking sensor kit consists of a wired LED Display that plugs into a control box in the back of the vehicle. The control box gets its power from the reverse light source.
The system uses ultrasonic distance measurements to detect distance between the vehicle rear and obstacles. The systems will display the distance in meters and beep with the beeping getting faster as you get closer to the obstacle. Measurements start at ~ 6 feet (2.0m) and constantly beeps at ~ 7 inches (.2m)
When the vehicle is in reverse the parking sensor kit will switch on automatically and off when you switch back to drive gear
Radar distance measurement with LED number display
LED Display indicates Left/Right and four color seven segement intelligent display.
Audible warning sound of "BiBi", faster as you get closer to obstacle.
Sound is built into the display
Sound switch on/off if you don't want to hear the "BiBi" built into the display
Super Wide Detection Range
4 Black 22mm In-Bumper Sensors with Hole Drill Bit
Display is 3" wide x 1" high x 3/4" Deep
6 Months Warranty
Click Here to view a 24 minute Sample Installation Video (requires IExplorer)
Red Wire to +12V from Reverse Light
Black Wire to Ground